MEMBRANE FILTERS
Its strength and durability result in advantages for use in automated equipment. The membrane is of a hydrophilic nature and does not contain wetting agents, as well as a low amount of extractables.
FEATURES
- Filters Membranes surface area equal to 7 ft2 (0.65 m2) for each element 10 ‘’.
- High performance.
- Wide area to allow ample flow rate.
- Reduces maintenance time, lowering costs.
- Absolute membrane of 0.1 to 0.65 microns.
- Withstands temperatures of 185 ° F (85 ° C) to 30 consecutive minutes.
- Chemical Compatibility.
- Resistant to most acids, bases and oxidizing agents.
- Eliminates the need for wetting agents.
- Made following the cleaning category Cleanroom ISO Class 7.
- Meets USP Class VI biological test for plastics.
POLYETHERSULFONE
Venefilter offers this line with pleated asymmetric membrane elements and a strong microporous film made from polyethersulfone polymer, resistant to acids and bases. Its strength and durability result in advantages for use in automated equipment. The membrane is of a hydrophilic nature and does not contain wetting agents, as well as a low amount of extractables.
FEATURES
- VFPS1Membrane surface area equal to 7 ft2 (0.65 m2) for each element 10 ‘
- High performance.
- Wide area to allow ample flow rate.
- Reduces maintenance time, lowering costs.
- Absolute membrane of 0.1 to 0.65 microns.
- Withstands temperatures of 185 ° F (85 ° C) to 30 consecutive minutes.
- Chemical Compatibility.
- Resistant to most acids, bases and oxidizing agents.
- Eliminates the need for wetting agents.
- Made following the cleaning category Cleanroom ISO Class 7.
- Meets USP Class VI biological test for plastics.
PTFE
Venefilter Inc., builds the pleated membrane filter with polytetrafluoroethylene (commonly known as Teflon) providing hydrophobicity and resistance to water intrusion compared with polyvinylidene fluoride and polyethylene membranes. The main virtue of polytetrafluoroethylene is that it is virtually inert, does not react with other chemicals except in very special situations. This is basically due to the protection of the fluorine atoms on the carbon chain. This lack of reactivity makes virtually zero toxicity.
FEATURES
- Surface area of 8.5 ft2, single-layer construction that provides higher flow rates and minimizes the size of the filtration system. rates and minimizes the size of the filtration system.
- 100% washable with water for 18 MW-cm ID and proof of integrity.
- Meets criteria applicable CFR and USP Class VI biological test for plastics.
- Made following the cleaning category Cleanroom ISO Class 7.
- Built with good manufacturing practices.
- Pore size, and batch no. number printed on each filter for identification and traceability.